Scanning An Image From The Macintosh - UMAX Technologies Astra 2100U Owner's Manual

21. Click on the Save & Send icon. Choose save from the drop-
down menu. Click the Save button to save the image.
22. Close the VistaScan window by clicking Exit.

Scanning an Image from the Macintosh

1. Double-click the Hard Drive icon.
2. Double-click the Adobe PhotoDeluxe 2.0 folder.
3. Double-click the Adobe PhotoDeluxe application icon to
launch PhotoDeluxe. The PhotoDeluxe screen appears.
4. Click the Get Photo button.
5. Click the Get Photo tab.
6. Click the Scanner button to display a menu of available input
sources. Click on the UMAX VistaScan entry in the input
source list. The UMAX VistaScan input source is highlighted.
Click OK. The VistaScan Beginner window appears.
NOTE: You only need to select the device driver once in
PhotoDeluxe. It will remember your selection the next time you use
the application.
7. Select an item you would like to scan (a picture, a brochure,
etc.).
8. Lift the document cover and place the item face-down so the
top center of the image aligns with the arrow ( ) at the back
edge of the object glass.
14