Table of Contents
Advertisement
Step 3. Connect the Power Adapter
1.
Plug the scanner's power cord into an electrical outlet.
2.
Insert the other end of this cord into the power adapter receptacle marked "POWER" on the back panel
of the scanner as shown in picture G.
Step 4. Turn on your scanner
Turn the scanner power switch on. When the Power Indicator is on, your scanner is ready to use.
Completing your First Scan
Before proceeding with the steps below, please finish the hardware and software installation first. Refer to
the section of the Quick Start Guide.
How to scan images
Original Image Placement
1.
Raise the scanner's document cover.
2.
Place the document (graphic, text, or photo) face down on the scanner. Use the triangular marks
along the edge of the glass to position your document.
3.
Lower the document cover.
A. Using the bundled image editing application to scan the image
1. Open Adobe PhotoShop Elements and select File, Import, Select Twain Source. Select
MagicScan as your Twain source (this only needs to be done the first time you use the
scanner).
2. Select File, Import, MagicScan to launch MagicScan driver.
3. The UMAX scanner driver MagicScan windows will appear as shown in fig. 1. Click on the
"Preview" button to pre-scan the document.
8
Advertisement
Table of Contents
