Remote Starter Functions; Remote Starting; Extended Runtime; Remote Stop - Ultra Start 2250 Series Owner's Manual

OWNER'S GUIDE
Page 4
Remote Sta r ter Functions
Remote Star ting
1.Press and release the
2.The park lights will flash and the siren will chirp one time.
3.The vehicle will then remote start. The park lights will flash four times
then remain on while the vehicle is running.*
Never remote start if the vehicle is parked in a garage or attached
Note: If the remote starter fails to start, the park lights will flash a Trouble
Extended Run Time
1. Press and release the
2. The system will respond with one park light flash and siren chirp
to confirm Extended Runtime. The system will reset the run time*

Remote Stop

1.Press and hold the
shut down. The park lights will flash and the siren will chirp 2
times to confirm shutdown.
Note: Pressing the brake pedal or opening the hood will also shut down

Idle Mode

1. While the vehicle is running with key, press the
2. The park lights will turn on and the siren will chirp once.
3. Turn the ignition key off and the vehicle will continue to run for the
programmed run time.*

Turbo Timer Mode

1.While the vehicle is running with key, press the # button.
2.The park lights will turn on and the siren will chirp once.
3.Turn the ignition key off and the vehicle will continue to run for
approximately 2 minutes.
carport! Operate in a well ventilated area only.
Shooting Code. Count the number of flashes and refer to the
Diagnostics Chart on page 10.
the remote starter.
REMOTE VEHICLE STARTER
button.
button while the vehicle is running.
button for three seconds. The remote starter will
button.
*(Default 15 minutes)