2.2
LED Identification
This section provides an overview of the front and rear LEDs.
2.2.1 Front LEDs
LED
System LED
Power LED
Fan LED
10G SFP+
slots
AGC7648S V1 Aggregation Switch
Upper SFP+ Port LED
Lower SFP+ Port LED
Description
Solid Green – Normal operation
•
Blinking Green – Booting progress or System in diagnostic mode
•
Solid Amber – System failure
•
Off – No power
•
Solid Green – Power supply units are supplied to the switch & operating normally
•
Solid Amber – Power supply unit failure
•
Off – Power is disconnected
•
Solid Green – All fans are operating normally
•
Solid Amber – One or more fans failure
•
LED (Solid Lighting – Linkup; Blinking – Activity)
Solid Green – A valid 10G link
•
Solid Amber – A valid 1G link
•
Blinking –Packet transmission or reception in progress
•
Off – No link
•
Upper QSFP28 Port LED
Lower QSFP28 Port LED
(Figure 2-3: Front LED Identification)
4
Power LED
System LED
Fan LED