Led Identification - Delta Agema Series Installation Manual

2.2

LED Identification

This section provides an overview of the front and rear LEDs.
2.2.1 Front LEDs
Upper SFP+ Port LED
Lower SFP+ Port LED
LED
System LED
Power 1 LED
Power 2 LED
Fan LED
400GE
QSFP-DD
Slots
(Four LEDs/
port)
AGC032 Spine Switch
Description
Solid Green – Normal operation
•
Blinking Green – Booting progress
•
Solid Amber – I/O Port Module Fault
•
Blinking Amber – CPU Hang, System over current, or System over Voltage
•
Off – No Power
•
Solid Green – Power supply 1 operating normally
•
Solid Amber – Power supply 1 failed
•
Off – Power is disconnected
•
Solid Green – Power supply 2 operating normally
•
Solid Amber – Power supply 2 failed
•
Off – Power is disconnected
•
Solid Green – All fans are operating normally
•
Solid Amber – One fan or more failed
•
LED1 (Solid Lighting – Linkup; Blinking – Activity)
Solid Cyan – 400G Operation
•
Solid Purple – 200G Operation
•
Solid Green – 100G Operation
•
Solid White – 50G Operation
•
Off – No Link
•
Upper QSFP-DD Port LED
Lower QSFP-DD Port LED
(Figure 2-3: Front LED Identification)
4
Management Port LED
Power 1 LED
Power 2 LED
System LED
Fan LED