Table of Contents
Advertisement
1.1
Overview
AGC7648S V1 is a ToR/Leaf and EoR switch with deep buffers for data center deployment
or as mobile access/aggregation switching and edge routing in service provider network.
AGC7648S V1 is not only offering 100GbE uplink ports but also supporting virtualization
features. AGC7648S V1 is SDN capable, compatible with choices of third party NOS and as
well as ONIE, openflow for today's open network ecosystem. It also provides comprehensive
capability on layer 2 and layer 3 features, including SNMP, Spanning Tree, VLAN, QinQ,
Trunk, QoS, RIP, OSPF, IGMP, DVMRP, PIM-DM, PIM-SM, Access Control, etc. This product
which aims for Data Center and Carrier Networks also supports advance features such as
MPLS, TRILL, PFC, VEPA, QCN, VxLAN and NVGRE to meet Data Center high performance
and virtualization requirement.
1.2
Package Content
After unpacking this switch, check the contents to be sure you have received all the
components. Then, before beginning the installation, be sure you have all other necessary
installation equipment.
• AGC7648S V1 series switch: AGC7648S V1 or AGC7648SL V1 *based on the SKU
ordered
• Rack-mounting kits
• Installation guide
If any item is missing or damaged, contact the vendor immediately, see " Technical Support ".
Chapter 1: Introduction
1
Advertisement
Table of Contents
