Stihl FS 240 Service Manual page 95

Installation
1
: Push on new gasket (1)
: Press carburetor (1) over the
studs (arrows)
2 3
: Push connector (1) with fuel
hose (2) into the fuel suction
hose (3) so that it between the
ribs (arrows) – fuel hose is
secured
94
1
: Push the new fuel return line (1)
completely onto the
connector (2)
Versions with M-Tronic
Leads and plug connections must
1
not be damaged.
1
: Orient bushing (1) with
switchgear so that the
scale (arrow) faces the cylinder
1 : Guide bushing (1) with
switchgear over the choke
lever (2) and position
– Install filter housing, b 11.2
Versions with M-Tronic
2
: Orient plug (1) so that the
lug (arrow) aligns with the groove
in the mount (2)
– Push plug into the mount as far
as it will go
1
2
Do not expose plug to tensile loads,
thus run leads so that they form a
90° loop at the plug.
: Press black lead (1) as far as it
will go into the guides (arrows),
starting at the plug
: Press red lead (2) as far as it will
go into the guides (arrows),
starting at the plug
FS 240 C, FS 260 C, FS 360 C, FS 410 C, FS 460 C-M
1
2
2