Stihl FS 240 Service Manual page 107

Installation
1 3
4
3
2
: Align the new gasket (1) so that
the tab (2) faces downward and
the holes (arrows) match
: Insert two screws (3) and affix
gasket to spacer flange (4)
2
2
2
: Position spacer flange (1) with
gasket on cylinder intake port
: Insert and tighten down the
screws (2)
106
2
: Orient lever (1) so that the
pins (arrows) face the spacer
flange and push it onto the
post (2)
1
1
: Push circlip (1) into place
1
: Hook throttle cable (1) onto
lever (2) and press it into the
mount (arrow)
1
: Hook the throttle rod (1) onto the
lever (2)
1
: Orient gasket (1) so that the
holes (arrows) match and the
openings engage the ridge (2)
: Press gasket (1) over the studs
– Reassemble remaining parts in
reverse order
2
FS 240 C, FS 260 C, FS 360 C, FS 410 C, FS 460 C-M
2
1
2