Cleaning And Care; Cleaning; Maintenance; Repair - Parkside PSSAP 20-Li B2 Operation And Safety Notes

Flush cuts
(Fig . K)
With elastic bi-metal saw blades you can
¾
separate water pipes, for example, flush to
the wall .
Make sure that the saw blade is always
¾
longer than the pipe diameter . There is a risk
of kickback and personal injury .
˜ Cleaning and care
m
WARNING!
Always switch the product off, remove
the battery pack 8 and let the
product cool down before performing
inspection, maintenance and cleaning
work!
˜ Cleaning
Never allow fluids to get into the product .
¾
The product must always be kept clean, dry
¾
and free from oil or grease . Remove debris
from it after each use and before storage .
Regular and proper cleaning will help ensure
¾
safe use and prolong the life of the product .
Clean the product with a dry cloth . Use a
¾
soft brush for areas that are hard to reach .
In particular clean the air vents after every
¾
use with a cloth and soft brush .
The vents must always be clear .
¾
NOTE
Do not use chemical, alkaline, abrasive
u
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces .
˜ Maintenance
The product is maintenance-free .
¾
Before and after each use, check the product
¾
and accessories (e .g . saw blades) for wear
and damage . If required, exchange them
for new ones as described in this instruction
manual . Observe the technical requirements
(see "Technical data") .
Check covers and safety devices for
¾
damages and correct installation . Replace as
necessary .
Replace a blunt or bent saw blade or one
¾
which has been damaged in some other
way .
˜ Repair
This product does not contain any parts that can
be repaired by the user . Contact an authorised
service centre or a similarly qualified person to
have it checked and repaired .
GB/IE 39