Cleaning And Care; Cleaning; Maintenance; Repair - Parkside PSSAP 20 Li C4 Short Manual

6. Select the battery pack
8 ] [
sabre saw "PSSAP 20 Li C4 (2201)" can be found in
Device info
.
NOTE
Smart device not connected
If
u
Device info
:
Check if the battery pack
product.
Check if the connection status LED
continuously.
NOTE
If the connection status LED
u
continuously:
Connect the cordless sabre saw to the battery pack
Press the on/off switch/speed control
The connection status LED
and lights up continuously. The cordless sabre saw
"PSSAP 20 Li C4 (2201)" is shown in
The products were already connected to the Lidl
Home app:
+
tab. The Lidl Home app scans the
Tap on the
o
area for available devices. The Lidl Home app indicates
if available devices have been found.
NOTE
If the Lidl Home app cannot find available devices,
u
continue with "No automatic suggestion of available
devices".
No automatic suggestion of available devices:
+
1. Tap on the tab.
Other
2. Select in the bar on the left.
Other-2 . The display flashes rapidly. The Lidl
3. Select
Home app scans the area for available devices.
+
4. Tap to select the battery pack
battery pack to the app.
Next
5. Tap .
Done
6. Tap . The overview page of the battery pack
is shown.
7. The information of the cordless sabre saw "PSSAP 20 Li C4
(2201)" can be found in
NOTE
Upgrading the firmware can change the features of the
u
Lidl Home app.
. The information of the cordless
is displayed under
is inserted into the
8 ] [
lights up
[ ]
does not light up
[ ]
[ 8 ]
for 5 seconds.
6 ] [
blinks for a few seconds
[ ]
Device info
.
and to add the
[ 8 ]
8 ] [
Device info .
˜ Cleaning and care
m
WARNING!
Always switch the product off, remove the battery
pack and let the product cool down before
[ 8 ]
performing inspection, maintenance and cleaning
work!
˜ Cleaning
Never allow fluids to get into the product.
The product must always be kept clean, dry and free from
oil or grease. Remove debris from it after each use and
before storage.
Regular and proper cleaning will help ensure safe use and
prolong the life of the product.
Clean the product with a dry cloth. Use a soft brush for
.
areas that are hard to reach.
In particular clean the air vents after every use with a cloth
and soft brush.
The vents must always be clear.
NOTE
Do not use chemical, alkaline, abrasive or other
u
aggressive detergents or disinfectants to clean this
product as they might be harmful to its surfaces.
˜ Maintenance
Before and after each use, check the product and
accessories (e.g. saw blades) for wear and damage. If
required, exchange them for new ones as described in this
instruction manual. Observe the technical requirements
(see "Technical data").
Check covers and safety devices for damages and correct
installation. Replace as necessary.
Replace a blunt or bent saw blade or one which has been
damaged in some other way.
˜ Repair
This product does not contain any parts that can be repaired
by the user. Contact an authorised service centre or a similarly
qualified person to have it checked and repaired.
˜ Storage
Clean the product as described above.
Store the product and its accessories in a dark, dry, frost-
free, well-ventilated place.
Always store the product in a place that is inaccessible
to children. The ideal long term storage (longer than
3 months) temperature is between +20 and +26 °C.
Store the product in its case .
[ ]
GB/IE 35