8-Troubleshooting - Haier HWM70-FD10829 User Manual

8-Troubleshooting

of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
improper repairs can cause considerable consequential damages..
A damaged power cable should only be replaced by the manufacturer, its service
8.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
1:25
The remaining wash cycle time will be 1 hour and 25 minutes.
6:30
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 min-
utes.
End
cLo1 -
Function child lock is activated.
LocI -
Door is closed because of high water level, high water temperature or spinning cy-
cle.
bEEP OFF
The buzzer is deactivated.
bEEP ON
The buzzer is activated.
8.2 Troubleshooting with display code
Problem Cause
E1
• Drainage error, water is not fully drained
within 6 minutes.
E2
• Lock - error.
E4
• Water level not reached after 10
minutes. at the latest.
• Drain hose is self-syphoning.
E8
• Water protective level - error.
F3
• Temperature sensor - error.
F4
• Heating error.
Solution
•
• Check drain hose installation.
• Shut the door properly.
• Make sure that tap is fully opened and water
Pressure is normal.
• Check drain hose installation.
• Contact the After sales service.
• Contact the After sales service.
• Contact the After sales service.
21