Advertisement

User manual
Washing machine
HWM70-FD10829

Advertisement

Table of Contents
loading

Summary of Contents for Haier HWM70-FD10829

  • Page 1 User manual Washing machine HWM70-FD10829...
  • Page 2 Thank You Thank you for purchasing a Haier Product. Please read these instructions carefully before using this appliance. The instructions con- tain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.
  • Page 3: Table Of Contents

    Content 1-Safety information .......................... 4 2-Product description ........................7 3-Control panel ........................... 8 4-Programmes ..........................11 5-Daily use ............................12 6-Eco-friendly washing ........................17 7-Care and cleaning .........................18 8-Troubleshooting ..........................21 9-Installation ............................24 10-Technical data ..........................28...
  • Page 4: 1-Safety Information

    1-Safety information ing safety hints!: WARNING! Make sure there is no transport damage. Make sure all transport bolts are removed. Remove all packaging and keep out of children´s reach. Handle the appliance always with at least two persons because it is heavy.
  • Page 5 1-Safety information WARNING! Daily use Do not remove or insert the plug in the presence of flammable Do not hot wash foam rubber or sponge-like materials. Do not wash any laundry which is polluted with flour. Do not open detergent drawer during any wash cycle. Do not press the door during the washing process, it gets hot.
  • Page 6 1-Safety information WARNING! Installation Install or use the appliance only where the temperature is above 5 °C. Do not place the appliance directly on a carpet, or close to a wall or furniture. Do not install the appliance in direct sunlight or in the near of heat sources(e.g.
  • Page 7: 2-Product Description

    2-Product description Note: 2.1 Picture of appliance Front (Fig. 2-1): Rear side (Fig. 2-2): HW80-B14636 Cotton Bedding Bulky Shirts Kid’s Wear Express 15 min Down Sport Strong Silk Spin Middle Disinfection Sterilization Rinse+Spin Self Clean Hygiene Soft 1400 Power Program Start/Pause Extra rinse Temp...
  • Page 8: 3-Control Panel

    3-Control panel HWM70-FD10829 Cotton Bedding Shirts Kids Quick 15 Wear Duvet Sport Strong Hijab Spin Middle Disinfection Rinse+Spin Drum Clean Hygiene 1000 Soft Spin speed capacity Start/ Power Program Temp. Delay Spin Pause 4 5 6 7 8 Function buttons:...
  • Page 9 3-Control panel 3.2 “Power“ button Press this button (Fig. 3-2) gently to switch on, the display is shining. Press it again for about 2 seconds to Power vated after a while machine will shut down automati- cally. 3.3 Programme selector Press one of these buttons (Fig.
  • Page 10 3-Control panel Express 15min 3.5.3-Function button “Delay” Fast 3-5.3 3-5.4 Delicate/ Press this button (Fig. 3-5.3) to start the programme Silk Hand with a delay. End time delay could be increased in steps wash Strong Hygienic 6:30 means end of programme cycle will be in 6 hours Babycare Middle and 30 minutes.
  • Page 11: 4-Programmes

    Yes, Optional, º Programme Max. load Temperature Fibre type Preset spin speed in kg in °C in rpm seletable HWM70-FD10829 range • º * to 90 Cotton Cotton High • º Shirts 40 to 60 40 Shirts Middle • º...
  • Page 12: 5-Daily Use

    5-Daily use 5.1 Power supply Connect the washing machine to a power supply (240V/50Hz; Fig. 5-1). Please refer also to section INSTALLATION. 5.2 Water connection Before connecting check the cleanliness and clar- ity of the water inlet. Tun on the tap (Fig.5-2). Note: Tightness Before use check for leakage in the joints between the tap and the inlet hose by turning on the tap.
  • Page 13 5-Daily use Care chart Washing Washable up to 95°C Washable up to 60°C Washable up to 60°C normal process normal process mild process Washable up to 40°C Washable up to 40°C Washable up to 40°C normal process mild process very mild process Washable up to 30°C Washable up to 30°C Washable up to 30°C...
  • Page 14 5-Daily use 5.5 Selecting detergent Use only machine wash approved detergent. Mind always detergent manufacturer recommendations. Do not use dry cleaning agents such as trichloroethylene and similar products. Choose the best detergent Kind of detergent Universal Colour Delicate Special Softener Programme Cotton Shirts...
  • Page 15 5-Daily use 5.6 Adding detergent 1. Slide out the detergent drawer. 2. Put the required chemicals into corresponding compartments (Fig. 5-6) 3. Push back the drawer gently. Note: Remove detergent residues before next wash cycle from the detergent drawer. Do not overuse detergent or softener. Please follow the instruction on the detergent package.
  • Page 16 5-Daily use 5.10 Start wash programme 5-10 Start/ Press “Start/Pause“ button (Fig. 5-10) to start. Appli - Pause ance operates according to present settings. Changes are only possible by cancelling the programme. 5.11 Interrupt - cancel wash programme To interrupt a running programme press gently “Start/Pause“. The LED in the button is flashing.
  • Page 17: 6-Eco-Friendly Washing

    6-Eco-friendly washing Environmentally responsible use To achieve best use of energy, water, detergent and time you should use the recom- mended maximum load size. Do not overload (hand width clearance above laundry). For slightly soiled laundry select the Express 15 min programme. Apply exact dosages of each washing agent.
  • Page 18: 7-Care And Cleaning

    7-Care and cleaning 7.1 Cleaning the detergent drawer Take always care there are no detergent residues. Clean the drawer regularly (Fig. 7-1): 1. Pull out the drawer until it stops. 2. Press the release button and remove the drawer. 3. Flush the drawer with water until it is clean and insert the drawer back in the appliance.
  • Page 19 7-Care and cleaning 7.5 Long periods of disuse 7-5.1 7-5.2 If the appliance is left idle for a longer period: 1. Pull out the electrical plug (Fig. 7-5.1). 2. Turn of water supply (Fig. 7-5.2). 3. Open the door to prevent formation of moisture and odours.
  • Page 20 7-Care and cleaning 7-6.7 9. Clean carefully pump filter, e.g. using running water 7-6.8 (Fig. 7-6.7). 10. Refx it thoroughly (Fig. 7-6.8). 11. Close service flap. CAUTION! ▶ Pump filter sealing has to be clean and unhurt. If the lid is not full tightened, water can escape.
  • Page 21: 8-Troubleshooting

    8-Troubleshooting of a problem please check all shown possibilities and follow below instructions before you contact an after sales service. See CUSTOMER SERVICE. WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. improper repairs can cause considerable consequential damages.. A damaged power cable should only be replaced by the manufacturer, its service 8.1 Information codes Following codes are displayed only for information referring to the washing cycle.
  • Page 22 8- T roubleshooting Problem Cause Solution • Motor - error. • Contact the After sales service. • Abnormal communication error. • Contact the After sales service. FC0, FC1 or • Unbalanced load - error. • Reduce the load. • Water level sensor error. •...
  • Page 23 8-Troubleshooting Problem Cause Solution Automatic adjust- • Washing programme duration will • This is normal and doesn‘t af- ment of washing be adjusted. fect functionality. time. Spinning fails. • Unbalance of laundry. • Check machine load and laun- dry and run a spinning pro- gramme again.
  • Page 24: 9-Installation

    9-Installation 9.1 Preparation Take the appliance out of the packaging. Remove all packaging material including polystyrene base, keep them out of childrens reach. While opening the package, water drops may be seen on plastic bag and port- hole. This normal phenomenon results from water tests in the factory. Note: Packaging disposal Keep all packaging materials out of children´s reach and dispose them in an environmen- tally friendly manner.
  • Page 25 9-Installation 3. Replace back cover by inserting it in the two gaps 9-3.3 9-3.4 its convexity is facing out (Fig. 9-3.3). 4. Fill left holes with blanking plugs (Fig. 9-3.4) . Note: Keep in safe place Keep the transportation bolts in a safe place for later use.
  • Page 26 9-Installation 9.6 Drain Water Connection Fix the water drain hose properly to the piping. The hose has to reach at one point a height between 80 and 100 cm above the appliance bottom line! If possible keep always drain hose fixed to the clip at the appliance back. WARNING! ▶...
  • Page 27 9-Installation 9.7 Fresh Water Connection 9-7.1 9-7.2 Make sure that the gaskets are inserted. 1. Connect the water inlet hose with the angled end to the appliance (Fig. 9-7.1). Tighten the screw joint by hand. 2. The other end connect to a water tap with a 3/4“ thread (Fig.
  • Page 28: 10-Technical Data

    10-Technical data 10.1 Additional technical data HWM70-FD10829 Dimension Height 850mm Width 595mm Depth 460mm Power supply 240V/50Hz Current Max power 2050W Water Pressure 0.03Mpa≤P ≤1Mpa Max. water inlet- cold temperature Net weight 64kg Capacity Max spin speed 1000rpm 10.2 Standards and Directives This product meets the requirements of all applicable EC directives with the correspon ding harmonised standards, which provide for CE marking.

Table of Contents