8-Troubleshooting - Haier HW150-BP14986ES9 User Manual

8-Troubleshooting

Many occuring problems could be solved by yourself without specifi c expertise. In case
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
Electrical equipment should be serviced only by qualifi ed electrical experts, because
improper repairs can cause considerable consequential damages..
A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualifi ed persons in order to avoid a hazard.
8.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code
:
:
//

 
 
 
 
8.2 Troubleshooting with display code
Problem




24
Message
The remaining wash cycle time will be 1 hour and 25 minutes
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 min-
utes
1/2/3 additional rinses are choosen (see FUNCTION BUTTONS "Extra rinse").
The washing cycle is fi nished. The appliance shuts off automatically.
Function child lock is activated.
Door is closed because of high water level, high water temperature or spinning cycle.
The buzzer is deactivated
The buzzer is activated
Cause
• Drainage error, water is not fully drained
within 6 minutes.
• Lock error
• Water level not reached after 8 minutes.
• Drain hose is self-syphoning.
• Drainage error in the beginning 3
minutes of Refresh.
• Water protective level error.
Solution
• Clean pump fi lter.
• Check drain hose installation.
• Shut the door properly.
• Make sure that tap is fully opened and water
pressure is normal.
• Check drain hose installation.
• Select no speed and run Spin to drain
water
• Run solutions in
• Contact the After sales service.
EN
as repair actions.