Related Manuals for Haier HWM70-10
Summary of Contents for Haier HWM70-10
- Page 1 Full Automatic Washing Machine With Pump This manual is for HWM70-10 Please read this manual carefully before using. Retain it for future reference. User's manual User's manual...
-
Page 2: Table Of Contents
Contents Specifications...the 2 Names of the parts...1 Safety precautions ...2 Installation and adjustment ...4 Preparation before washing ...8 Put in the laundries ...9 Usage of the detergent ...9 Use the operation buttons ...10 Close the top lid ...14 Finish washing ...14 Disposal after washing ...15 Trouble shooting Answer to question...16 Packing list ...17... -
Page 3: Names Of The Parts
Names of the par ts Top lid B Lint filter (Installed by user) Control panel Filter cover Inner tub Pulsator Control panel film Cabinet ase frame Meaning and description of the symbols Contents marked with that symbol are related to the safety Warning sign of the product and the personal safety of the users. -
Page 4: Specifications
Safety precautions Please plug the plug on special receptacle with rated voltage. Be sure to use single- phase three pins receptacle. Ensure the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible. Do not damage the power cord,bend ,extend,twist,bind or alter it by force.Do not press or nip it with weight. - Page 5 Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not let the children climb the washing machine. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine.
-
Page 6: Installation And Adjustment
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter Push the lint filter downward to location for lint filter. Adjust the installation position The largest allowed slope of the shank base of the machine is 2 . -
Page 7: Usage Of The Drain Hose
How to change the direction of the drain hose 1.Lean the machine down gently with the front surface facing the ground. Loosen the eight screws by a cross screwdriver. Bottom plate Back Front Soft item 2.Pull out the drain hose from the groove at the right side. -
Page 8: Install The Water Inlet Hose
Install the water inlet hose Confirm the water tap Water tap, suitable Outlet end surface It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage. -
Page 9: Connection Between The Water Inlet Hose And The Washing Machine
Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer. -
Page 10: Preparation Before Washing
Preparation before washing Pay attention to followings before washing the laundries Confirm Clear the pocket. there's special Take out the requirment for coins , sand, the laundries. hairpins etc. a.Please check if the laundries are applicable for washing. b.Separate those not colorfast from other laundries. c.For laundries not water absorbing, please put them into water with hands. -
Page 11: Put In The Laundries
Put in the laundries Usage of the detergent Inlet box of the detergent How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color. -
Page 12: Use The Operation Buttons
Use the operation buttons A.Description of the function of the buttons Mode and meaning of indicator light Flashing: indicate the running program On:indicate the program about to run,or indicate the selected mode The use selects a suitable water level depending on the load. If QUICK WASH is selected water level will indicate 2 .After water level reaches 2,it will wash while water filling, and wash normally upon the water level reaching... - Page 13 START/PAUSE button After the power is switched on, press it to start the machine. During working, push it to pause. During pause, push this button to restart and go on working. Numeral tube To indicate -- during sensing. To indicate remaining min. During program running.
- Page 14 B.Operating procedure and explanations for the buttons STANDARD JEANS GENTLE QUICK WASH WATER LEVEL SELECTION PROGRAM SELECTION 1.Push the POWER ON/OFF button to switch on the power 2.Push the PROGRAM SELECTION button to select the suitable automatic program After switching on the power, the machine will set to STANDARD program automatically. To select other program, push the PROGRAM SELECTION button till the corresponding indicator is on.
- Page 15 Attention Even there's no water in the tub, the spinning will start after a certain period. Do not use soak process for woolen Wash the laundries that are prone to lose colors separately from other laundries. The pulsator will not rotate unless the water is filled to selected water level.
-
Page 16: Close The Top Lid
Time list of Each Program(minutes) Wash Water Program (minute) level Standard About 13 15 About 13 15 Jeans About 3 Gentle About 4 About 3 Quick wash Total time: including the normal water inlet time and drain time. Spin time: the time from intermittent running to finishing. * The STANDARD and JEANS automatic programs can be fitted with soaking. -
Page 17: Disposal After Washing
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Please rotates detergent box to control panel after clean it. -
Page 18: Trouble Shooting Answer To Question
Trouble shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. -
Page 19: Packing List
Packing list Name Quantity One piece User's manual One piece Guarantee Components of the water inlet hose One piece Lint filter One piece Bottom plate One piece Tapping screws Eight piece Full automatic One set washing machine Storage position Inside the document bag Inside the document bag Inside the accessory bag Inside the document bag...