Preparations Before The Initial Use; Default Ex-Work Status For Initial Use - Kohler EIR Installation Manual

Preparations before the initial use

Confirm if inlet valve is OPEN.
Confirm battery has been installed in the "remote" correctly
Confirm no obstacle in front of product.
After toilet self-inspection completed, it is normal to hear motor rotating and water flow noise. When night light blink
indicates self-inspection is in process.

Default ex-work status for initial use:

Front wash：
Water temp: mid
Water flow intensity: mid
Ejection position: dial 3
Auto cover OPEN/CLOSE: ON, distance mid
Auto flush function: ON
The above settings are for the full-functional version. For differences in the specifications of models, refer to their
product configuration matrix.
Kohler Co.
Fig.#21
Rear wash:
Water temp: mid
Water flow intensity: mid
Ejection position: dial 3
Auto UV function: ON
Electrolyzed water function: ON
15
Spiral wash:
Water temp: mid
Water flow intensity: mid
Ejection position: dial 3
Seat temp: mid
Wind temp: mid
Night light: ON
Energy saving: OFF
Deodorizer: ON
1366733-T01-D