Overall Sketch; Preparations Before Installation - Kohler EIR Installation Manual

Overall Sketch

Auxiliary button
* Antibacterial: the seat contains long term inorganic anti-bacteria material which will inhibit bacteria growth on surface, this does not represent the mildew and other incidental effects. The
antibacterial rate is more than 90%. (Perform test in accordance with GB21551.2-2010 requirements. Testing lab: China household electrical appliances testing institute; electromechanical
products testing technology center of Shanghai Entry-Exit inspection and quarantine bureau.)

PREPARATIONS BEFORE INSTALLATION

A.
Hold the rim of the vitreous shell and take the toilet out.
WARNING: Risk of personal injury and product damage! Please do not hold the rim of the bidet seat when lifting the
toilet. As the toilet is heavy, please seek help if necessary.
Note: do not remove cover and seat protection bag during installation process.
Kohler Co.
× 2
Press button to enter front wash
Light detection
Bidet nozzle
Fig.#4
Fig.#5
5
1. Standby mode.
Press and hold (over 2s) "
standby mode. Details refer to "Homeowner's
Guide" Page 15 "Standby mode".
2. Stop function.
Press " " button to stop flush, dryer, air care,
one button sterilization, manual wand clean and
UV function.
Press button to enter rear wash
" button to enter
Press button to enter toilet flush
1366733-T01-D