Preparations Before Initial Use - Kohler K-5401TW-2-0 Homeowner's Manual

Preparations before the initial use
Tee valve connection
Ensure if water inlet valve is OPEN.
□
Confirm that the battery has been correctly installed in the "remote controller".
□
Confirm that there is no obstacle in front of the product.
□
the toilet complete the self check, after the product is powered on. During that time, it is normal to hear
□
rotating sound of the motor and bicker, or see the night light flicker. When the lighting stops flickering, the
self-check is completed.
When used for the first time, it will be in a default state:
□
Front:
Water temp: mid
●
●
Position: mid
●
Rear:
Water temp: mid
●
●
Position: mid
●
Spiral:
Water temp: mid
●
●
Position: mid
●
1413476-TW01-A
Seat temp: mid
Wind temp: mid
: mid Night light: On
Energy saving mode: On
: mid
Electrolyzed water function: On
Water pump: On (press and hold flush and front
wash button on toilet side panel, short "beep"
: mid
indicates water pump is on, long "beep"
indicates water pump is off.)
10 Kohler Co.