Loading A Menu From A Smart Card; Saving A Menu To A Smart Card - TurboChef Tornado Owner's Manual

9 : Insert Smart Card
F I G U R E

LOADING A MENU FROM A SMART CARD

At some point you may be required to overwrite the
existing menu settings with new ones via a smart
card. Please note that once the procedure below is
completed, the old menu settings will be perma-
nently lost.
1. Ensure the oven is in the
mode.
DOWN
2. Enable the
LOAD MENU
a. Simultaneously press the
b. Enter the code 6-3-6-8 (M-E-N-U) and press
.
ENTER
c. Press 9 to enable
3. Remove the lower access panel (Figure 9).
4. Insert smart card into oven (Figure 9).
5. Press the bottom-left soft key.
6. Select
LOAD MENU FROM CARD
the smart card will load to the oven.
7. When this process completes, the oven will
beep. Remove the smart card and reattach the
lower access panel.
/
OVEN OFF COOLING
function:
and keys.
UP DOWN
.
LOAD MENU
. The menu on
ASSEMBLY AND INSTALLATION

SAVING A MENU TO A SMART CARD

At some point you may be required to save your
existing menu settings to a smart card (for example,
if the control board needs to be replaced). Please
note that once the procedure below is completed,
any existing menu settings on the smart card will be
permanently lost.
1. Ensure the oven is in the
mode.
DOWN
2. Enable the
SAVE MENU
a. Simultaneously press the
b. Enter the code 6-3-6-8 (M-E-N-U) and press
.
ENTER
c. Press 9 to enable
return to
OVEN OFF
d. Simultaneously press the
e. Enter the code 7-2-8-3 (S-A-V-E) and press
. The oven will return to the
ENTER
screen.
COOLING DOWN
3. Remove the lower access panel (Figure 9).
4. Insert smart card into oven (Figure 9).
5. Press the bottom-left soft key.
6. Select
SAVE MENU TO CARD
oven will load to the smart card.
7. When this process completes, the oven will
beep. Remove the smart card and reattach the
lower access panel.
/
OVEN OFF COOLING
function:
and keys.
UP DOWN
. The oven will
LOAD MENU
/ .
COOLING DOWN
and keys.
UP DOWN
OVEN OFF
. The menu on the
9
/