Cadillac XT4 Owner's Manual page 85

84 SEATS AND RESTRAINTS
under the head restraint and
in between the head restraint
posts.
If the position you are using
has an adjustable head
restraint and you are using a
dual tether, raise the head
restraint and route the tether
under the head restraint and
in between the head restraint
posts.
3. Make sure the child restraint top
tether hook is completely closed
and secured to the top tether
anchor.
Head Restraint Removal and
Reinstallation
The rear outboard head restraints can
be removed if they interfere with the
proper installation of the child
restraint.
To remove the head restraint:
1. Partially fold the backrest
forward. See Rear Seats 0 51 for
additional information.
2. Press both buttons on the head
restraint posts at the same time,
and pull up the head restraint.
3. Store the head restraint in a
secure place.
4. When the child restraint is
removed, reinstall the head
restraint before the seating
position is used.
Warning
With head restraints that are not
installed and adjusted properly,
there is a greater chance that
occupants will suffer a neck/spinal
injury in a crash. Do not drive until
the head restraints for all occupants
are installed and adjusted properly.
To reinstall the head restraint: