Cadillac XT4 Owner's Manual page 191

Hide thumbs Also See for XT4:
Table of Contents

Advertisement

190
DRIVING AND OPERATING
: Press to turn the system on and
off. A white indicator appears in the
instrument cluster when cruise is
turned on.
RES+ : If there is a set speed in the
memory, move the thumbwheel up
briefly to resume that speed or press
and hold to accelerate. If the cruise
control is already active, use to
increase vehicle speed. To increase
speed by 1 km/h (1 mph), press the
thumbwheel up to the first detent
toward RES+. To increase speed to the
next 5 km/h (5 mph) mark on the
speedometer, press the thumbwheel
up to the second detent.
SET : Move the thumbwheel down
briefly to set the speed and activate
cruise control. If the cruise control is
already active, use to decrease vehicle
speed. To decrease speed by 1 km/h
(1 mph), move the thumbwheel down
toward SET . To decrease speed to the
next 5 km/h (5 mph) mark on the
speedometer, move the thumbwheel
down toward SET to the second
detent.
: Press to disengage cruise control
without erasing the set speed from
memory.
Setting Cruise Control
If
is on when not in use, SET or
RES+ could get pressed and go into
cruise when not desired. Keep
when cruise is not being used.
1. Press
.
2. Get up to the desired speed.
3. Move the thumbwheel down to
SET . The desired set speed
briefly appears in the instrument
cluster.
4. Remove your foot from the
accelerator.
When the cruise control has been set
to the desired speed, a green cruise
control indicator appears on the
instrument cluster and a cruise set
speed message appears on the
Head-Up Display (HUD), if equipped.
Resuming a Set Speed
If the cruise control is set at a desired
speed and then the brakes are applied
or
is pressed, the cruise control is
disengaged without erasing the set
speed from memory.
Once the vehicle speed reaches about
off
40 km/h (25 mph) or more, move the
thumbwheel up toward RES+ briefly.
The vehicle returns to the previous set
speed.
Increasing Speed While Using
Cruise Control
If the cruise control system is already
activated:
Move the thumbwheel up toward
RES+ until the desired speed is
reached, then release it.
To increase vehicle speed in small
increments, move the thumbwheel
up toward RES+ briefly. For each
press, the vehicle goes about
1 km/h (1 mph) faster.
To increase vehicle speed in larger
increments, move the thumbwheel
up toward RES+ to the second

Advertisement

Table of Contents
loading

Table of Contents