Configure Blf; Etension Settings - VTech VSP726 Configuration Manual

Open a new browser window and enter your phone IP address, e.g. http://192.168.1.22.
Enter username and password and press Confirm button.
details are username: admin and password: admin.
Click on Servicing tab.
Click on Provisioning link in the left hand navigation menu.
In the Server URL field enter tftp:// followed by Hostname or IP Address
Example for Hostname: tftp://voip.bicomsystems.com
Example for IP Address: tftp://192.168.1.10
Click on Save button.
Click on Reboot link in the left hand navigation menu.
Click on Reboot button.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above described, you
should have successfully registered your phone to PBXware. Dial *123 to verify registration.

Configure BLF

This chapter describes how to configure BLF (Busy Lamp Field) for VTech VSP726.
The following topics are covered:
- Extension Settings
- Phone Settings

Etension Settings

Login to PBXware web administration interface.
Open a new browser window and enter the IP address in order to access the PBXware web
administration login page. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
NOTE:
Factory default login