Subtracting Values; Deleting Measured Values - Bosch Professional GLM 500 Manual

Press the [+] button (3). The calcu-
lated area and the + symbol will be dis-
2
50.039 m
0.0° 2
+93.406 m
played.
2
Press the measuring button (2) [ ] to
143.45 m
start another area measurement.
Measure the area as described in the section on
area measurement (see "Area measurement",
page 26). Once the second measurement is com-
pleted, the result of the second area measurement
is displayed below. To show the end result, press
the measuring button (2) [ ] once more.
Note: In the case of a length measurement, the
end result is displayed immediately.
To exit addition, press the [Func] button (7).

Subtracting values

To subtract values, press the button (8) [–]. The
subsequent steps are the same as for the section
on adding values.

Deleting measured values

Briefly pressing the on/off button (5) [ ] will de-
lete the last measured value in all measuring func-
tions. Repeatedly pressing the on/off button (5)
[ ] briefly will delete the measured values in re-
verse order.
Bosch Power Tools
English | 33
1 609 92A 5E4 | (07.05.2020)