Table of Contents
Advertisement
lock in the open position. This releases the door from the hinges.
6.
Grasp the door firmly with both hands and pull it away from the hinges; then, set the door aside.
Reverse this procedure to install the rear doors on the rack cabinet. Make sure that the door with the spring-
loaded latch is installed on the left side.
Reversing a front door
To reverse a front door on a rack cabinet so that it opens in the opposite direction, complete the following
steps:
1. Remove the door according to
2. Use a hex wrench to remove the top and bottom hinges from the rack cabinet; then, install the hinges on
the other side of the rack.
Note: There are extra screws in the hardware kit in case you drop one into the rack channel.
3. Remove the front door latch and attach it to the other side of the rack.
4. Carefully rotate the door 180°; then, install the door on the other side of the rack by using the instructions
in
Removing and installing a front door.
Removing and installing a front door.
Figure 13. Moving the door hinges and front door latch
22
Advertisement
Table of Contents
