Table of Contents
Advertisement
•
Ensure that there is no stabilizer bracket installed on the rack cabinet.
•
Do not use a ramp inclined at more than ten degrees.
•
Once the rack cabinet is in the new location, do the following:
-
Lower the four leveling pads.
-
Install stabilizer brackets on the rack cabinet.
-
If you removed any devices from the rack cabinet, repopulate the rack cabinet from the
lowest position to the highest position.
If a long distance relocation is required, restore the rack cabinet to the configuration of the rack
cabinet as you received it. Pack the rack cabinet in the original packaging material, or equivalent.
Also, lower the leveling pads to raise the casters off of the pallet and strap the rack cabinet to the
pallet.
Statement 12:
CAUTION:
See the instructions in the rack documentation before you install devices, remove devices, or
relocate the rack.
Statement 13:
CAUTION:
The weight of this part or unit is more than 55 kg (121.2 lb). It takes specially trained persons, a
lifting device, or both to safely lift this part or unit.
>55 kg (121.2 lb)
55 kg ( 121.2 lb)
ix
Advertisement
Table of Contents
