Table of Contents
Advertisement
4.
Bolt the rack to the floor surface through the holes in the front stabilizer and the side stabilizer brackets
(see Figure 7) and reinstall the side covers.
Removing and installing the upper side covers
The standard rack comes with the upper side covers installed. Remove the side covers from the rack
before you install or remove optional devices.
To remove the upper side covers from a standard rack, complete the following steps:
1.
Unlock both button locks on a side cover.
Figure 7. Installing the side stabilizer brackets and bolting the rack to the floor surface
Side
cover
Handle
Button
lock
18
Advertisement
Table of Contents
