Table of Contents
Advertisement
Chapter 2. Installing a rack
The standard and expansion rack cabinets are 42U-high1 racks. The standard rack cabinet comes with side
covers installed. The expansion rack cabinet does not come with side covers but includes the required
hardware for building a suite of racks. You need one standard rack cabinet per suite.
Notes:
1.
Each stand-alone rack must be attached to the floor by a trained service technician according to your local
building codes.
2.
The illustrations in this document might differ slightly from your hardware.
Statement 1:
CAUTION:
To ensure safety, all configurations of the rack cabinet must be certified by a nationally recognized
testing laboratory in order to verify compliance with country-specific safety regulations. This process
ensures that the end product remains safe for the operator and service personnel under normal and
forseeable misuse conditions.
Note: The illustrations in this document might differ slightly from your hardware.
1. One U is equal to 4.45 cm (1.75 in.)
Figure 1. 42U 1200 mm Deep Dynamic Rack
13
Advertisement
Table of Contents
