4. DISPLAY SECTION AND OPERATION SECTION OF THE CONVERTER UNIT
4. DISPLAY SECTION AND OPERATION SECTION OF THE CONVERTER UNIT
4.1 Display flowchart
Use the display (4-dight, 7-segment LED) on the front panel of the Converter unit for status display,
parameter setting, etc. Set the parameters before operation, diagnose an alarm, confirm external
sequences, and/or confirm the operation status.
Press the MODE, UP or DOWN button once to move the next screen.
Within one-revolution position
Downloaded from
ManualsNet.com
Status display
Diagnosis
Bus voltage
Sequence
External I/O signal
Effective load ratio
Output signal
Peak load ratio
forced output
Software
[%]
version L
Software
version H
search engine
button
MODE
Alarm
Current alarm
ParameterNo.0
Last alarm
ParameterNo.1
Tenth alarm in past
ParameterNo.8
Parameter
ParameterNo.9
errorNo.
4 - 1
Basic parameters
UP
DOWN