Technical Data - Graco XM PFP Instructions - Parts Manual

Technical Data

Maximum working pressure . . . 6000 psi (41 MPa, 414 bar) for A and B materials
Maximum fluid temperature . . . 180°F (82°C)
Fluid inlet . . . . . . . . . . . . . . . . . 3/4 in. npt and 3/4 in. x 1/2 in. nipple fittings for 3/4 in. x 1/2 in. hoses
Fluid outlet size. . . . . . . . . . . . . 1/2 in. npt(m) nipple
Solvent inlet valves . . . . . . . . . . 1/4 in. npt(m)
Heated fluid ports . . . . . . . . . . . 1/4 in. npt(f)
Wetted parts . . . . . . . . . . . . . . . Manifold block and internal parts: PTFE, electroless nickel plated steel, zinc plated
3A2988C
4500 psi (31 MPa, 310 bar) for flushing fluid
100 psi (0.7 MPa, 7 bar) for heating fluid
steel
Flush valves and fittings: stainless steel, plated carbon steel, hardened alloy steel,
acetal, PTFE
Fluid ball valves: plated carbon steel, acetal, PTFE, FKM
Fluid check valves: plated carbon steel, carbide seat, PTFE, alloy steel ball
Technical Data
21