Setting Up The Audio Options - Samsung DVD-HD850 Manual

C S
H A N G I N G E T U P M E N U

Setting Up the Audio Options

Audio Options allows you to setup the audio device and sound status settings
depending on the audio system in use.
1
With the unit in Stop
mode, press the MENU
button.
2
Press the /❷ buttons to Language Setup
Audio Setup
select Setup, then press
Display Setup
the ❿ or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Press the /❷ buttons to Language Setup
select Audio Setup, then Audio Setup
Display Setup
press the ❿ or ENTER
Parental Setup :
button.
DivX(R) Registration
Setup
4
AUDIO SETUP
Dolby/DTS Digital Out : PCM
Press the /❷ buttons to
MPEG-2 Digital Out : PCM
select the desired item,
Dynamic Compression : On
PCM Down Sampling : On
then press the ❿ or
ENTER button.
ENG-50
❿
❿
❿
❿
❿
❿
❿
❿
❿
❿
To make the setup menu disappear, press the
MENU button.
C S
H A N G I N G E T U P M E N U
Dolby/DTS Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital or DTS Bitstream via digital output.
Select Bitstream when connecting to a Dolby Digital and DTS Decoder.
Note
• There is no analog audio output when you play a DTS disc.
MPEG-2 Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs MPEG-2 Bitstrean via digital output. Select Bitstream when connecting to
an MPEG-2 Decoder.
Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case,
all signals will be output without any changes.
Note
Even when PCM Down sampling is Off
• Some discs will only output down sampled audio through the digital outputs.
HDMI
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS,
MPEG), you should set Digital Audio to PCM.
- If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM
Down sampling to On.
Note
• To make the Setup menu disappear, press the MENU button.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
ENG-51