Storing Current Switch Configuration - Planet GS-4210 Series Quick Installation Manual

3.3 Storing Current Switch Configuration
In the Managed switch, the running configuration file is stored in the RAM. In the
current version, the running configuration sequence of running-config can be saved
from the RAM to FLASH by writing the command or copying the running-config
startup-config command, so that the running configuration sequence becomes
the startup configuration file, which is the configuration saved.
1. At the "GS-4210 Series#" prompt, enter "copy running-config startup-
config" as shown in Figure 3-5.
Figure 3-5: Storing Current Configuration Command Screen
If you are not familiar with console command or the related para-
meter, enter "?" anytime in console to get the help description.
Note
9