Starting Web Management; Logging In To The Managed Switch - Planet GS-4210 Series Quick Installation Manual

802.3bt poe++ l2/l4 managed gigabit ethernet switch
Hide thumbs Also See for GS-4210 Series:
Table of Contents

Advertisement

4. Starting Web Management

The following shows how to start up the Web Management of the Managed
Switch. Note the Managed Switch is configured through an Ethernet connection.
Please make sure the manager PC must be set to the same IP subnet address.
For example, the default IP address of the Managed Switch is 192.168.0.100,
then the manager PC should be set to 192.168.0.x (where x is a number
between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ45/UTP Cable
IP Address:
192.168.0.100
Figure 4-1: IP Management Diagram

4.1 Logging in to the Managed Switch

1. Use Internet Explorer 8.0 or above Web browser and enter IP address
https://192.168.0.100 to access the Web interface.
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents