Recovering Back To Default Configuration - Planet GS-4210 Series Quick Installation Manual

5. Recovering Back to Default Configuration
 IP address has been changed or admin password has been forgotten –
To reset the IP address to the default IP address "192.168.0.100" or reset the
login password to the default value, press the hardware-based reset button on
the front panel for about 10 seconds. After the device is rebooted, you can log in
the management Web interface within the same subnet of 192.168.0.xx.
GS-4210-8HP2S
LNK/ACT
PoE-in-Use
LED Mode
Reset
Mode
(Press for 3 secs.)
Reset Button
GS-4210-16UP4C
Console
Reset
115200, N, 8, 1
Reset Button
14
2-Port 10/100/1000T 802.3bt PoE + 6-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed
LNK/ACT
1 5 9
1000 10/100
Console
PoE-in-Use
2 6 10
bt af/at
7
3
PWR 4 8
115200, N, 8, 1
Figure 5-1: GS-4210-8HP2S Reset Button
802.3bt PoE ++
16-Port Gigabit
4 8 12 16
2 6 10 14
PoE
1 3 5 7 9 11 13 15
SYS
PWR
1000 LNK ACT bt PoE-in-Use
10/100 LNK ACT at/af PoE-in-Use
Figure 5-2: GS-4210-16UP4C Reset Button
1 2 3 4
Managed Switch
5 6
2
1