Requirements - Planet GS-4210 Series Quick Installation Manual

2. Requirements

z Workstations running Windows XP/2003/2008/Vista/7/8/10, MAC OS X or later,
Linux, UNIX, or other platforms are compatible with TCP/IP protocols.
z Workstations are installed with Ethernet NIC (Network Interface Card)
z Serial Port Connection (Terminal)
 The above Workstations come with COM Port (DB9) or USB-to-RS-232
converter.
 The above Workstations have been installed with terminal emulator, such as
Hyper Terminal included in Windows XP/2003, putty or tera term.
 Serial cable -- One end is attached to the RS-232 serial port, while the other
ends to the RJ45 type console port of the Managed Switch.
z Ethernet Port Connection
 Network cables -- Use standard network (UTP) cables with RJ45 connectors.
 The above PC is installed with Web browser.
It is recommended to use Internet Explorer 8.0 or above to access
the Managed Switch.
If the Web interface of the Managed Switch is not accessible,
Note
please turn off the anti-virus software or firewall and then try it
again.
4