Ac Input/Output Connection; Maintenance - Tripp Lite APSINT612 Owner's Manual

AC Input/Output Connection

To avoid overloading your Inverter/Charger, be sure to match the power requirements of the equipment you plan to run at any one time (add their
total watts) with the output wattage capacity of your Inverter/Charger model (see Specifications). When figuring the power requirements of
your equipment, do not confuse "continuous" wattage with "peak" wattage ratings. Most electric motors require extra power at start-up
("peak" wattage) than required to run continuously after start-up, sometimes over 100% more. Some motors, such as in refrigerators and
pumps, start and stop intermittently according to demand, requiring "peak" wattage at multiple, unpredictable times during operation.
™
• DoubleBoost Feature
Tripp Lite Inverter/Chargers deliver up to twice their nameplate
rated wattage for up to 10 seconds,* providing the extra power
needed to cold start heavy-duty tools and equipment.
AC Input Connection
Connect one end of the detachable 2 meter power cord, included, into the IEC-320 AC Input receptacle. Connect the other end to your wall
outlet. If the plug on the cord does not match your wall receptacle, you can remove a detachable cord from another piece of equipment (such
as a computer or monitor) that does have the appropriate plug and use that as the Inverter/Charger power cord. Then use the included detachable
2 meter cord to connect the piece of equipment, whose cord you've removed, to the NEMA 5-15R output receptacle on the Inverter/Charger.
AC Output Connection
Simply connect equipment directly to the IEC-320 and NEMA output receptacles. A universal adapter, included, allows you to connect a
wide variety of plug styles to the NEMA receptacle.
Service
If you are returning your Inverter/Charger to Tripp Lite, please pack it carefully, using the ORIGINAL PACKING MATERIAL that came
with the unit. Enclose a letter describing the symptoms of the problem. If the Inverter/Charger is within the warranty period, enclose a copy
of your sales receipt. To obtain service you must obtain a Returned Material Authorization (RMA) number from Tripp Lite or an author-
ized Tripp Lite service center.

Maintenance

Your Inverter/Charger requires no maintenance and contains no user-serviceable or replaceable parts, but should be kept dry at all times.
Periodically check, clean and tighten all cable connections as necessary, both at the unit and at the battery.
™
• OverPower Feature
Tripp Lite Inverter/Chargers deliver up to 150% of their name
plate rated wattage for up to 1 hour,* providing plenty of reserve
power to reliably support tools and equipment longer.
* Actual duration depends on battery age, battery charge level and ambient temperature.
10A