Alert Problems; Vibrator - Sony Ericsson Z1010 Troubleshooting Manual

Hide thumbs Also See for Z1010:

Table of Contents

3 Alert Problems

•

Make a general visual inspection for corrosion and oxidation from liquid damage

according to point 1.2

•

Turn on the phone. Go to the service test menu; choose "Vibrator". Press any key to check

the vibrator works properly.

•

Check if the vibrator (Fig. 3.5) is mechanically damaged, dirty or oxidized. Replace it if

necessary.

•

Check if the vibrator pads (Fig. 3.6) are dirty or oxidized. Clean them if necessary.

If the fault still occurs, try updating the phone with the latest available software version. If this

does not solve the problem, handle the unit according to the local company or the GSP

directives.

4/00021-1/FEA 209 544/77 A



Sony Ericsson Mobile Communications AB

Fig. 3.5

Trouble Shooting Guide, Mechanical

Fig. 3.6

4(15)

Table of Contents