Bosch GSR18V-535FC Operating/Safety Instructions Manual page 19

2610055572 GSR18V-535FC 01-2020.qxp_GSR18V-60FC 1/28/20 8:40 AM Page 19
HDC200 SDS-Max Hammer Dust Collection Attachment
To reduce the risk of injury user must read instruction manual for the use of
the tool with this attachment.
IG. 18
BRUSH RING
(for use with GFA18-H SDS Hammer Adapter)
Disconnect the plug from
the power source before
making any assembly, adjustments or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
The HDC200 Bosch dust extraction attachment
is designed to be used in drilling applications
in concrete and masonry type materials. Not
for use on wood or metal materials.
The HDC200 is optimized for use with drill bit
diameters from 1/4" to 1-3/8". The maximum
bit diameter is 2-5/8" (brush ring must be
removed for diameters larger than 1-3/8").
Dust Extraction
(Sold Separately)
SAVE THESE INSTRUCTIONS
DUST PORT
Drilling Capacity
Optimized
Maximum
* brush ring must be removed for
HDC200 Operating Instructions
SAVE THESE INSTRUCTIONS
RUBBER SEAL
Use with VAC090A or VAC140A
with airflow 150 CFM (turbine)
176 CFM (vacuum) and a filter
efficiency of min. 99.9% in
combination with dust shroud
HDC200 (GDE68).
1/4" — 1-3/8"
2-5/8" *
diameters larger than 1-3/8"
Insert the dust extractor hose from the dust
extractor into the dust port of the dust
extraction unit (Fig. 19).
The Bosch dust extractor hose comes with a
sleeve nozzle attached to a snap-in connector.
The sleeve nozzle provides the quickest and
easiest connection of the nozzle to the
attachment. The snap-in connector provides a
more secured connection. To use the snap-in
connector, remove the rubber nozzle from the
dust extractor hose. Press the snap-in
connector into the dust port until you hear the
click.
19