Connection Of The Single Limb Circuit And Double Limb Circuit Expiratory Supports - ResMed Elisee 150 Clinical Manual

Connection of the single limb circuit and double limb circuit
expiratory supports
There are two supports available:
•
The single limb circuit support, to which the expiratory valve control and the proximal pressure
line can be connected.
Figure 3.6: Single limb circuit support.
•
The double limb circuit support, to which the expiratory limb can be connected.
The supports connect directly to the left side of the ventilator.
Figure 3.7: Double limb circuit support.
Attaching and removing
Clips
Centring lugs
Figure 3.8: Attaching and removing the expiratory support.
To remove a support
1. Press the two fastening clips
2. Pull the support.
To attach a support
1. Position the two centring lugs opposite their holes
2. Press on the support until the two fastening clips lock into place.
NOT013189-6
Installation 29/174