Data For Profibus-Dp - Siemens SIMATIC ET 200L Manual

Most Important
If you do not have the device master file in front of you, the most important
Characteristics
characteristics of the ET 200L distributed I/O device are listed here in tabular
form.
Table B-2

Data for PROFIBUS-DP

Characteristic
Manufacturer ID
Supports FMS
Supports 9.6 kbps
Supports 19.2 kbps
Supports 93.75 kbps
Supports 187.5 kbps
Supports 500 kbps
Supports 1.5 Mbps
Supports 3 Mbps
Supports 6 Mbps
Supports the FREEZE control command
Supports SYNC control command
Supports automatic baud rate recognition
PROFIBUS address modifiable using software
User-specific parameterization data (default)
Length of the user-specific data
Modular device
Maximum number of modules
Maximum number of inputs
Maximum number of outputs
Maximum number of inputs and outputs together
Central display of manufacturer-specific status and error messages
Assignment of values to texts in device-specific diagnostic field
Identification of all modules of a modular DP slave
Assignment of manufacturer-specific error types to texts in
channel-specific diagnostic field
ET 200L Distributed I/O Device
EWA-4NEB 780600902-05
Type and Device Master Files
DP Keyword in Accor- ET 200L
IEC
dance with
61784-1:2002 Ed1
CP 3/1
Ident_Number See Table B-4
FMS_supp No
9.6_supp Yes
19.2_supp Yes
93.75_supp Yes
187.5_supp Yes
500_supp Yes
1.5M_supp Yes
3M_supp No
6M_supp No
Freeze_Mode_supp Yes
Sync_Mode_supp Yes
Auto_Baud_supp Yes
Set_Slave_Add_supp No
User_Prm_Data Yes
User_Prm_Data_Len 5 bytes
5 00
Modular_Station 0
Max_Module 0
Max_Input_Len See Table B-3
Max_Output_Len
Max_Data_Len
Unit_Diag_Bit Not used
Unit_Diag_Area Not used
Module, End_Module No
Channel_Diag No
H
B-3