Product Overview
General Compo-
A range of components are available for setting up the ET 200L. You will
nents for the
find the components that you require for all versions of the ET 200L in
ET 200L
Table 1-1.
You will find other components in Section 1.2.1.
Table 1-1
General Components for the ET 200L
Component
Rail (EN 50022, 35 15 or
35 7.5)
Power supply (PS)
PROFIBUS cables with bus
connector
1-4
Function
... is the mounting rack for the
ET 200L.
... converts the mains voltage
(120/230 VAC) into a 24 V DC operat-
ing voltage for supplying the ET 200L.
... is the load current power supply for
the 24 V DC load circuits.
... interconnect the nodes of a PROFI-
BUS-DP installation.
Illustration
ET 200L Distributed I/O Device
EWA-4NEB 780600902-05