Table of Contents
Advertisement
Network
Verify with your network administrator whether the IP address for the TLSI is assigned by
Dynamic Host Configuration Protocol (DHCP) or set manually. If they are set manually,
you need to obtain an IP Address, Subnet Mask, Gateway Address, and Domain Name
Server (DNS) IP address from the network administrator.
Status
Host Name:
IP Address:
Subnet Mask:
Gateway:
Figure 7.
If IP addresses are assigned by DHCP, press On. If the IP address is to be assigned
1.
manually, press Off.
When DHCP is off, the Host Name is grayed out and cannot be edited. All
•
addresses can be edited (as shown in figure 9).
When DHCP is on, the Host Name can be edited. The addresses are grayed out
•
and cannot be edited because they are set by the DHCP server.
If DHCP is on, press the Host Name button to edit the host name. The Host Name
2.
dialog box opens:
Figure 8.
Use the keypad to enter a new name, which appears in the Host Name text box.
Display
Audio
Network
DHCP
On
Off
XYZ-123-AB-CD-EF
DNS Primary:
192.168.254.254
Domain Name:
255.255.0.0
Mac Address:
0.0.0.0
Network Screen
Host Name Dialog Box
Advanced
Exit
192.168.254.253
abcdefghijklmnop...
xx-xx-xx-xx-xx-xx
Revert
Apply
TLSI 201 • On-screen Menus
11
Advertisement
Table of Contents
