12
Obtain or select an IP address.
•
Highlight one of the following
options and press J :
Option
[Obtain
automatically]
[Enter
manually]
•
Press J to proceed when the "configuration complete"
message is displayed.
580
Creating Network Profiles (WT-6)
Select this option if the network is configured to
supply the IP address automatically. A
"configuration complete" message will be
displayed once an IP address has been assigned.
Enter the IP address and sub-net mask manually.
•
Press the center of the multi selector to display
a dialog where you can manually enter an IP
address.
•
Rotate the main command dial to highlight
segments.
•
Press 4 or 2 to change the highlighted
segment and press the center of the multi
selector when entry is complete.
•
Next, press J ; a "configuration complete"
message will be displayed. Press J again to
display the sub-net mask.
•
Press 1 or 3 to edit the sub-net mask and press
J ; a "configuration complete" message will be
displayed.
Description