❚❚ Using Buttons (Amber–Blue Only)
To adjust color temperature when [Choose color temperature]
is selected for white balance, hold the U button and use the
multi selector or rotate the sub-command dial.
•
Hold the U button and rotate the sub-command dial to
choose a color temperature in mireds.
•
To highlight a digit, hold the U button and press 4 or 2 .
Press 1 or 3 to edit the highlighted digit.
•
Changes apply only to the A (amber)–B (blue) axis.
•
The selected setting takes effect when the U button is
released.
D
Color-Temperature Selection
•
Do not use color-temperature selection with flash lighting or
fluorescent light sources; instead, use the [Fluorescent] or [Flash]
option, respectively.
•
When using color-temperature selection with other light sources, take a
test shot to determine if the selected value is appropriate.
Achieving Natural Colors with Different Light Sources (White Balance)
233