LED Lamp
Enable or disable the status LEDs on a WR-R10 wireless remote
controller mounted on the camera. For more information, see
the documentation supplied with the wireless remote
controller.
Link Mode
Choose a link mode for WR-R10 wireless remote controllers
mounted on other cameras or radio-controlled flash units that
support Advanced Wireless Lighting. Be sure that the same
mode is selected for the other devices.
Option
[Pairing]
926
B The Setup Menu: Camera Setup
The camera connects only to devices with which it has
previously been paired. Press the pairing button on the
WR-R10 wireless remote controller connected to the
camera to pair it with other devices.
•
As the camera will not communicate with devices with
which it has not been paired, this option can be used to
prevent signal interference from other devices in the
vicinity.
•
Given that each device must be paired separately,
however, PIN is recommended when connecting to a
large number of devices.
Description