Tripp Lite B096-048 Owner's Manual page 30

Note
The second Ethernet port on
gateway port or it can be configured as an OoB/Failover port - but not both. So be sure that you
did not allocate Management LAN as the Failover Interface when you configured the principal
Network connection on the System: IP menu
The B096-048/016 Console Server Management Switches also host a DHCP server which by default is set
at disabled. The DHCP server enables the automatic distribution of IP addresses to hosts running DHCP
clients on the Management LAN. To enable the DHCP server:
On the System: IP menu select the Management LAN page and click the Disabled label in the
DHCP Server field; or go to the System: DHCP Server menu and check Enable DHCP Server
the B096-048/016 can be configured as either a Management LAN
30