Tripp Lite B096-048 Owner's Manual page 130

Enter the Nagios Host Name that the Console Server will be referred to in the Nagios central
server – this will be generated from local System Name (entered in System: Administration) if
unspecified
In Nagios Host Address, enter the IP address or DNS name that the upstream Nagios server will
use to reach the Console Server – if unspecified this will default to the first network port's IP as
entered in System: IP)
In Nagios Server Address, enter the IP address or DNS name that the Console Server will use to
reach the upstream Nagios monitoring server
Check the Disable SDT Nagios Extensions option if you wish to disable the SDT Connector
integration with your Nagios server at the head end – this would only be checked if you want to
run a vanilla Nagios monitoring
If not, enter the IP address or DNS name the SDT Nagios clients will use to reach the Console
Server in SDT Gateway Address
When NRPE and NSCA are both enabled, NSCA is preferred method for communicating with the
upstream Nagios server – check Prefer NRPE to use NRPE whenever possible (i.e. for all
communication except for alerts)
_____________________________________________________________________
B096-016 B096-048 and B092-016 User Manual Page 130