Tripp Lite B096-048 Owner's Manual page 3

4.1.3 SDT Mode
4.1.4 Device (RPC, UPS, EMD) Mode
4.1.5 Terminal Server Mode
4.1.6 Serial Bridging Mode
4.1.7 Syslog
4.2 Add/Edit Users
4.3 Authentication
4.4 Network Hosts
4.5 Trusted Networks
4.6 Serial Port Cascading
4.6.1 Automatically generate and upload SSH keys
4.6.2 Manually generate and upload SSH keys
4.6.3 Configure the Slaves and their serial ports
4.6.4 Managing the Slaves
5. FAILOVER AND OUT-OF-BAND ACCESS
5.1 OoB Dial-In Access
5.1.1 Configure dial-in PPP
5.1.2 Using SDT Connector client for dial-in
5.1.3 Set up Windows XP/ 2003/Vista client for dial-in
5.1.4 Set up earlier Windows clients for dial-in
5.1.5 Set up Linux clients for dial-in
5.2 OoB Broadband Access (B096-048/016 only)
5.3 Broadband Ethernet Failover (B096-048/016 only)
5.4 Dial-Out Failover
6. SECURE TUNNELING AND SDT CONNECTOR
6.1 Configuring for SDT Tunneling to Hosts
6.2 SDT Connector Configuration
6.2.1 SDT Connector client installation
6.2.2 Configuring a new gateway in the SDT Connector client
6.2.3 Auto-configure SDT Connector client with the user's access privileges
6.2.4 Make an SDT connection through the gateway to a host
6.2.5 Manually adding hosts to the SDT Connector gateway
6.2.6 Manually adding new services to the new hosts
6.2.7 Adding a client program to be started for the new service
6.2.8 Dial- in configuration
3
39
39
39
40
41
41
44
44
46
47
47
48
50
51
52
52
52
54
54
55
56
56
56
58
60
61
61
62
63
64
65
66
67
69
70