Tripp Lite B096-048 Owner's Manual page 203

For each new Host you add, you will be asked to enter a Label (enter a descriptive name) and a
Hostname (enter the IP Address or DNS Name of the new network connected Host) and
possibly a Username (enter the name you will use to log in to the Host)
Once a Host has been added, you can select Edit and update the commands that will be
executed in connecting the service to the existing Host
The sixteen serial ports are pre-configured by default in Console Server mode for the B096-016 /
B096-048 Console Server Management Switch or in UPS (PowerAlert) mode for the B092-016
Console Server with PowerAlert product. To change these settings, select Configure, which will
load the local Firefox browser and run the Management Console. You can then reconfigure the
serial ports as detailed in Chapter 4
_____________________________________________________________________
B096-016 B096-048 and B092-016 User Manual Page 203