Tripp Lite B096-048 Owner's Manual page 187

Generated keys may be one of two types - RSA or DSA (and it is beyond the scope of this
document to recommend one over the other). RSA keys will go into the files id_rsa and
id_rsa.pub. DSA keys will be stored in the files id_dsa and id_dsa.pub.
For simplicity going forward, the term private key will be used to refer to either id_rsa or id_dsa
and public key to refer to either id_rsa.pub or id_dsa.pub.
To generate the keys using OpenBSD's OpenSSH suite, we use the ssh-keygen program:
$ ssh-keygen -t [rsa|dsa]
Generating public/private [rsa|dsa] key pair.
Enter file in which to save the key (/home/user/.ssh/id_[rsa|dsa]):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/user/.ssh/id_[rsa|dsa].
Your public key has been saved in /home/user/.ssh/id_[rsa|dsa].pub.
The key fingerprint is:
28:aa:29:38:ba:40:f4:11:5e:3f:d4:fa:e5:36:14:d6 user@server
$
It is advisable to create a new directory to store your generated keys. It is also possible to name
the files after the device they will be used for. For example:
$ mkdir keys
$ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/user/.ssh/id_rsa):
/home/user/keys/control_room
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
_____________________________________________________________________
B096-016 B096-048 and B092-016 User Manual Page 187