Toro 30549 Installation Instructions page 4

5. Install the blades, anti-scalp cups, and blade
bolts (Figure 2). Tighten the blade bolts to 115
to 149 N·m (85 to 110 ft-lb).
Important:
Ensure the curved part of the
blade is pointing toward the inside of the
mower deck.
Figure 2
1. Blade bolt
6. Rotate the blades to ensure that there is no
interference.
7. Tighten all the nuts and bolts.
8. Raise the front of the machine up, remove the
jack stands, and lower the machine.
9. Connect the battery; refer to your machine
Operator's Manual.
g004741
2. Anti-scalp cup
4