Bosch Professional D-tect 150 SV Original Instructions Manual page 15

OBJ_BUCH-1478-001.book Page 15 Friday, July 1, 2011 8:48 AM
Product Features
The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1 Marking aid, top
2 Wheel
3 Marking aid, left and right
4 Battery lid
5 Latch of battery lid
6 Handle
7 Maintenance flap
8 Serial number
9 Sensor area
10 Selection button, right
11 Start button
Start
12 Selection button, left
13 Audio signal button
14 Setup button
Setup
15 On/Off button
16 Display
17 LED
18 Protective pouch
The accessories illustrated or described are not included as stand-
ard delivery.
Display Elements
a Audio signal indicator
b Battery indicator
c Sensor-range indicator
d Area already detected
e Measuring scale for object depth
f Area not yet detected
g Outer edges, to be marked left and right via marking aid 3
h Operating-mode indication
i Black: Found object within the sensor range
j Grey: Found object outside of the sensor range
k Centre line, corresponds with the marking aid 1
l Indication of the object depth
m Indication of the object material
n "Live" wire indicator
Bosch Power Tools
Technical Data
Universal Detector
Article number
Measuring accuracy to the object
2)
centre a
Accuracy of the displayed object
2)
depth b
– in dry concrete
– in wet concrete
Minimum distance between two
2)
neighbouring objects c
Operating temperature
Storage temperature
Batteries
Rechargeable batteries
Operating life time, approx.
– Batteries (alkali-manganese)
– Rechargeable
batteries (2500 mAh)
Degree of protection
Dimensions
Weight according to
EPTA-Procedure 01/2003
1) Depending on size and type of object as well as material and condi-
tion of the base material
2) See graphic
c
b
a
In terms of accuracy, the measuring result can be inferior in case
of unfavourable surface quality of the base material.
Please observe the article number on the type plate of your measuring
tool. The trade names of the individual measuring tools may vary.
The measuring tool can be clearly identified with the serial number 8 on
the type plate.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents:
EN 61010-1, EN 55022, EN 55024, EN 302435-1,
EN 302435-2 according to the provisions of the directives
1999/5/EC, 2004/108/EC.
English | 15
D-tect 150 SV
Professional
3 601 K10 008
1)
±5 mm
1)
±5 mm
1)
±10 mm
1)
4 cm
–10 ... +50 °C
–20 ... +70 °C
4 x 1.5 V LR06 (AA)
4 x 1.2 V HR06 (AA)
5 h
7 h
IP 54 (dust and splash
water protected)
22 x 9.7 x 12 cm
0.7 kg
1 619 929 J48 | (1.7.11)